You can use the same method if you don’t need time watermark.Ģ0150608192526 N ( Don’t have time watermark) ( Such as “ 20160804174726 Y ”) Boot up the camera to shoot videos, the video will show the time watermark you save in the txt document. Edit and save the time you need in the document. The camera will automatically create a TXT text document in the TF card directory.( As the pic ) Shutdown the camera, connect the camera to computer with USB cable, open TIMEREST.txt document. When the camera is under standby mode, the camera will shut-down automatically after one minute without any working mode.
Press ON / OFF button for about 6 seconds to shutdown the camera. If you want to shut down the camera under the video recording, photo taking, motion detection mode. If the machine crashes, the button can not be used normally, you can use sharp objects to press reset (R) hole, then it can be used normally Or the camera will keep recording until out of battery. Insert TF card, connect USB 5V charger or power bank with USB cable, start recording videos while charging the camera.Ĭlick any button to stop recording. Note: When the battery power is low, the red and blue indicator lights flash at the same time for about 5 seconds, the camera will shut-down automatically, enter into the protection state (The recording file will save automatically), the camera should be charged under this condition. ( Please charge for more than 30 minutes to make sure the battery is fully charged.) When the red indicator light keeps on but stops flashing means charging is completed. * The red indicator light is on and flashing normally when you charge the camera. Charging while recording: Connect to external USB 5V charger or power bank. Connect the camera to computer, charge it with USB cable.Ģ. The camera built-in rechargeable lithium battery, please charge it before the first using.ġ.
Boot up the camera without TF card, the camera will shut-down automatically after the red and blue indicator flashing for 5 seconds at the same time.
0 kommentar(er)
